View HMC527LC4_618482.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HMC527LC4
v00.0505
GaAs MMIC I/Q MIXER 8.5 - 13.5 GHz
Typical Applications
The HMC527LC4 is ideal for: * Point-to-Point Radios
Features
Wide IF Bandwidth: DC - 2 GHz Image Rejection: 35 dB LO to RF Isolation: 45 dB High Input IP3: +28 dBm RoHS Compliant 4x4 mm SMT Package
7
MIXERS - SMT
* Point-to-Mulit-Point Radios & VSAT * Test Equipment & Sensors * Military End-Use
Functional Diagram
General Description
The HMC527LC4 is a compact general purpose I/Q MMIC mixer in a leadless RoHS compliant SMT package, which can be used as either an Image Reject Mixer or a Single Sideband Upconverter. The mixer utilizes two standard Hittite double balanced mixer cells and a 90 degree hybrid fabricated in a GaAs MESFET process. A low frequency quadrature hybrid was used to produce a 100 MHz USB IF output. This product is a much smaller alternative to hybrid style Image Reject Mixers and Single Sideband Upconverter assemblies. The HMC527LC4 eliminates the need for wire bonding allowing use of surface mount manufacturing techniques.
Electrical Specifications, TA = +25 C, IF= 100 MHz, LO = +19 dBm*
Parameter Frequency Range, RF/LO Frequency Range, IF Conversion Loss (As IRM) Image Rejection 1 dB Compression (Input) LO to RF Isolation LO to IF Isolation IP3 (Input) Amplitude Balance Phase Balance 37 17 17 Min. Typ. 8.5 - 13.5 DC - 2 8 25 +21 45 22 +25 0.6 6 37 18 10 27 Max. Min. Typ. 10.5 -12 DC - 2 7.5 34 +21 45 24 +28 0.4 6 9.5 Max. Units GHz GHz dB dB dBm dB dB dBm dB Deg
* Unless otherwise noted, all measurements performed as downconverter.
7 - 394
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC527LC4
v00.0505
GaAs MMIC I/Q MIXER 8.5 - 13.5 GHz
Data taken as IRM with External IF Hybrid Conversion Gain vs. Temperature
0
Image Rejection vs. Temperature
50
CONVERSION GAIN (dB)
-5
IMAGE REJECTION (dB)
40
30
+25C +85C -40C
7
MIXERS - SMT
7 - 395
-10
20
-15
+25 C +85 C -40 C
10
-20 8 9 10 11 12 13 14 RF FREQUENCY (GHz)
0 8 9 10 11 12 13 14 RF FREQUENCY (GHz)
Conversion Gain vs. LO Drive
0
Return Loss
0
CONVERSION GAIN (dB)
-5 RETURN LOSS (dB) -5
-10
-10
-15
-15
+17dBm +19dBm +21dBm
-20
RF LO
-20 8 9 10 11 12 13 14 RF FREQUENCY (GHz)
-25 8 9 10 11 12 13 14 FREQUENCY (GHz)
Input P1dB vs. Temperature
24 22 20 P1dB (dBm)
Input IP3 vs. LO Drive
35 30 25
18 16 14 12 10 8 9 10 11 12 13 14 RF FREQUENCY (GHz)
+25C +85C -55C
IP3 (dBm)
20 15 10 5 8 9 10 11 12 13 14 RF FREQUENCY (GHz)
LO = +17 dBm LO = +19 dBm LO = +21 dBm
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC527LC4
v00.0505
GaAs MMIC I/Q MIXER 8.5 - 13.5 GHz
Quadrature Channel Data Taken Without IF Hybrid Isolations
-10
IF Bandwidth*
0
RETURN LOSS CONVERSION GAIN
ISOLATION (dB)
-30 LO/IF1 RF/IF1 -40 LO/RF -50 RF/IF2
RESPONSE (dB)
7
MIXERS - SMT
-20 LO/IF2 -5
-10
-15
-60 8 9 10 11 12 13 14 RF FREQUENCY (GHz)
-20 0.5
1
1.5
2
2.5
3
3.5
IF FREQUENCY (GHz)
Amplitude Balance vs. LO Drive
4
Phase Balance vs. LO Drive
15 10 5 0 -5 -10 -15
PHASE BALANCE (degrees)
AMPLITUDE BALANCE (dB)
2
LO = +17dBm LO = +19dBm LO = +21dBm
LO = +17dBm LO = +19dBm LO = +21dBm
0
-2
-4 8 9 10 11 12 13 14 RF FREQUENCY (GHz)
8
9
10
11
12
13
14
RF FREQUENCY (GHz)
Upconverter Performance Conversion Gain vs. LO Drive*
0
Upconverter Performance Sideband Rejection vs. LO Drive*
0 SIDEBAND REJECTION (dBc) -10 -20 -30 -40 -50 -60
LO = +17 dBm LO = +19 dBm LO = +21 dBm
CONVERSION GAIN (dB)
-5
-10
-15
+17 dBm +19 dBm +21 dBm
-20 8 9 10 11 12 13 14 RF FREQUENCY (GHz)
8
9
10
11
12
13
14
RF FREQUENCY (GHz)
* Conversion gain data taken with external IF hybrid
7 - 396
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC527LC4
v00.0505
GaAs MMIC I/Q MIXER 8.5 - 13.5 GHz
Harmonics of LO
nLO Spur at RF Port LO Freq. (GHz) 1 8.5 9.5 10.5 11.5 12.5 13.5 43 48 53 50 48 44 2 48 47 51 57 52 51 3 50 57 62 67 67 64 4 77 64 53 45 47 xx
MxN Spurious Outputs
nLO mRF 0 1 2 3 4 0 xx 33 86 96 89 1 -11 0 77 95 94 2 16 53 76 101 96 3 22 62 78 91 101 4 38 95 94 102 107
7
MIXERS - SMT
7 - 397
RF = 10.6 GHz @ -10 dBm LO = 10.5 GHz @ +19 dBm Data taken without IF hybrid All values in dBc below IF power level
LO = +19 dBm Values in dBc below input LO level measured at RF Port.
Absolute Maximum Ratings
RF / IF Input LO Drive Channel Temperature Continuous Pdiss (T=85C) (derate 7.8 mW/C above 85C) Thermal Resistance (RTH) (junction to die bottom) Storage Temperature Operating Temperature +20 dBm +27 dBm 150C 460 mW 140 C/W -65 to +150 C -40 to +85 deg C
ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS
NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30 - 80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKLE 3. DIMENSIONS ARE IN INCHES [MILLIMETERS] 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND 7. CLASSIFIED AS A MOISTURE SENSITIVITY LEVEL (MSL) 1.
Outline Drawing
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC527LC4
v00.0505
GaAs MMIC I/Q MIXER 8.5 - 13.5 GHz
Pin Descriptions
Pin Number 1, 2, 6-8, 10, 13, 17-24 Function Description No connection required. These pins may be connected to RF/DC ground without affecting performance. Interface Schematic
N/C
7
MIXERS - SMT
3, 5, 12, 14, 16
GND
These pins and package bottom must be connected to RF/DC ground.
4
RF
This pin is AC coupled and matched to 50 Ohms from 8.5 to 13.5 GHz.
9
IF1
11
IF2
This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source/sink more than 3mA of current or part non-function and possible part failure will result.
15
LO
This pin is AC coupled and matched to 50 Ohms from 8.5 to 13.5 GHz.
7 - 398
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
HMC527LC4
v00.0505
GaAs MMIC I/Q MIXER 8.5 - 13.5 GHz
Evaluation PCB
7
MIXERS - SMT
List of Materials for Evaluation PCB 109998
Item J1 - J2 J3 - J4 U1 PCB [2] Description PCB Mount K RF Connector, SRI PCB Mount SMA Connector, Johnson HMC527LC4 109996 Evaluation Board [1] [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350
The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
7 - 399

▲Up To Search▲

Price & Availability of HMC527LC4

	To Download HMC527LC4 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .